Business and Management

Fundamentals of Paint Spray Booth Lighting

The most typical type of lighting used in paint spray booths are panel mounted fluorescent light fittings. The fixtures are in fact mounted and recessed from the booth panels.

Panel mounted design gives a very simple and efficient way of installation. These fittings are generally built of either 18 or 20 gauge steel construction.

Coupled with a white baked enamel finish, a durable and extremely reflective fixture complete is made. You can browse https://spraytech.com/open-face-booth/ to know more about paint booth services.

A clean, tempered safety glass lens is sealed and gasketed to guarantee a durable, long-lasting seal against dust, vapor, and moisture.

Commonly utilized fixtures of the kind used in paint spray booths are 4 lamp, 4-foot fittings with 32, 40, or 60-watt HO lamps, together with 40-watt lamps being the most commonly utilized.

The fittings will normally possess an interior, back, or double inside/rear access hinged door for the purpose of servicing the lamps and ballasts. In fittings with an interior accessibility, an interlock switch is supplied and is to be wired in such a way as to disable paint spray equipment once the interior access panel is opened.

This permits the fixture to be mounted in spray booth panels with no previously required next lens. In cases where a non-hazardous rated fixture is properly used, these have to be mounted behind a sealed static mounted lens. These fittings can only be serviced in the outside of their booth.

Hazardous rated fittings must, by hint, be Utilised in regions that stretch from the borders of any opening of their booth in accordance with the following:

* When the exhaust venting system is interlocked with the spray application equipment, then the Section 2 location will extend 5 feet and 3 feet straight in the open face or front of the stall.

* When the exhaust venting system isn't interlocked with the spray application equipment, then the Section 2 location shall extend 10 feet 3 feet straight in the open face or front of the stall. 

Tagged ,