Advantages of Paint Booth Designs

Paint booth devices typically refer to any type of structure that is designed to prevent contamination and unwanted air flow in areas involving painting. Over the years these technologies and industry has greatly improved. These products come in a variety of configurations ranging as small as a bench top paint booth or as big as an aircraft paint booth.

Since the term paint booth can be somewhat a board term there are a number of factors to consider when selecting the best paint booth for your application. You can visit if you are looking for table top paint booths in CA.

Paint booths offer a number of distinct advantages when used properly. Crossdraft Paint booths are very economical because they require the least amount of material. Paint booth type does not require a top plenum required in different types of paint booths.

Side draft paint booths are ideal for creating a pattern even air flow around the area of the painting. Style paint booth attract unwanted contaminates down and away from the finish. The disadvantage of these paint booths can be more expensive because it requires ductwork and a number of exhaust fans. Users are also limited in the number where he could stand so that overspray that is caught in the airstream.

Downdraft paint booths offer a plethora of cleanliness. The air flow is pulled around the objects painted and then move away from the bottom of the object. It allows the user to stand in any location in the paint booth and overspray will be trapped in the air flow.

Fundamentals of Paint Spray Booth Lighting

The most typical type of lighting used in paint spray booths are panel mounted fluorescent light fittings. The fixtures are in fact mounted and recessed from the booth panels.

Panel mounted design gives a very simple and efficient way of installation. These fittings are generally built of either 18 or 20 gauge steel construction.

Coupled with a white baked enamel finish, a durable and extremely reflective fixture complete is made. You can browse to know more about paint booth services.

A clean, tempered safety glass lens is sealed and gasketed to guarantee a durable, long-lasting seal against dust, vapor, and moisture.

Commonly utilized fixtures of the kind used in paint spray booths are 4 lamp, 4-foot fittings with 32, 40, or 60-watt HO lamps, together with 40-watt lamps being the most commonly utilized.

The fittings will normally possess an interior, back, or double inside/rear access hinged door for the purpose of servicing the lamps and ballasts. In fittings with an interior accessibility, an interlock switch is supplied and is to be wired in such a way as to disable paint spray equipment once the interior access panel is opened.

This permits the fixture to be mounted in spray booth panels with no previously required next lens. In cases where a non-hazardous rated fixture is properly used, these have to be mounted behind a sealed static mounted lens. These fittings can only be serviced in the outside of their booth.

Hazardous rated fittings must, by hint, be Utilised in regions that stretch from the borders of any opening of their booth in accordance with the following:

* When the exhaust venting system is interlocked with the spray application equipment, then the Section 2 location will extend 5 feet and 3 feet straight in the open face or front of the stall.

* When the exhaust venting system isn't interlocked with the spray application equipment, then the Section 2 location shall extend 10 feet 3 feet straight in the open face or front of the stall.